Product Introduction

YAYE 22mm Handlebar For Motorcycle Antirust fine iron plating faucet

handle bar with Modified Handlebar.

The handlebars of a motorcycle are made of steel pipes and are closely

connected to other parts of the handlebars, forming a key component of

the motorcycle's control system. The following is a detailed analysis of

the steel pipe handle of the motorcycle handlebar faucet

1, Basic Composition
Steel pipe: As the main material of the handle, steel pipe has the

advantages of light weight, high strength, and corrosion resistance,

and can withstand various forces and vibrations during cycling.

2, Function and Function
Control function: The steel pipe handle of the motorcycle handlebar

faucet is one of the main components for the rider to control the vehicle.

By turning the handlebar faucet, the rider can control the vehicle's

steering and direction of travel.
Load bearing function: During the cycling process, the steel pipe handle

needs to withstand the rider's hand force as well as the vehicle's

vibration and impact, so it needs to have good load bearing capacity

and stability.
Comfort and safety: The design of the handle cover can improve the

rider's grip and comfort, while reducing hand fatigue and vibration. In

addition, a stable handlebar faucet design also helps improve cycling

safety.

3, Characteristics and advantages
Lightweight design: Using steel pipes as the main material, it has the

characteristics of light weight and high strength, which helps to reduce

the weight of the entire vehicle and improve fuel economy.
Strong corrosion resistance: Steel pipe materials have good corrosion

resistance and can resist the erosion of environmental factors such as

rainwater and salt, extending their service life.
Adjustable: Some motorcycle handlebars have adjustable steel tube

handles, allowing riders to adjust the height and angle of the handle

according to their height and riding habits for a more comfortable riding

experience.

4, Precautions
During use, it is necessary to regularly check whether the fixed

connection of the handlebar faucet steel pipe handle is loose or

damaged, and promptly tighten or replace it.
Avoid parking motorcycles in damp or highly corrosive environments

for extended periods of time to reduce corrosion and damage to the

handlebars, faucets, and steel handles.
When conducting long-distance cycling or intense handling, attention

should be paid to maintaining even and stable grip strength in the

hands, and avoiding excessive impact and load on the steel handle

of the handlebar faucet.

means of preparation
Screwdriver or wrench: used to loosen and tighten screws.
Lubricant (optional): Applying a small amount of lubricant during

reinstallation can reduce friction and wear.
New handlebar faucet steel pipe handle and accessories: Ensure

to choose a handle that matches the vehicle model.
Replacement steps
Disconnect power: If it is an electric motorcycle, disconnect the

battery power first to avoid accidents during the replacement

process.
Dismantling the old handle:
Firstly, locate and loosen the screws that secure the handle of the

handlebar faucet steel pipe. These screws are usually located at

the bottom or side of the handle.
Use a suitable tool (such as a screwdriver or wrench) to completely

unscrew the screws and carefully place them aside to avoid loss.
Gently remove the old handle from the handlebar faucet. Be careful

not to apply too much force to avoid damaging other components.
Cleaning and inspection:
Before installing the new handle, clean the dust, oil stains, and

other debris on the handlebar faucet.
Check if there are any damaged or worn parts on the handlebar

faucet, and if necessary, repair or replace it.
Install a new controller:
Align the new handlebar faucet steel handle with the hole of the

handlebar faucet to ensure a tight fit with the other parts of the

handlebar faucet.
If the new handle comes with internal screws or other fasteners,

please install according to the instructions or installation guidelines.
Secure the new handle to the handlebar faucet using the screws

previously unscrewed. When tightening the screws, gradually apply

force to ensure that the handle is securely installed and will not

loosen.
Adjustment and testing:
After installation, adjust the angle and position of the handle to

ensure that it meets the personal riding habits and needs.
Gently turn the handlebar faucet and check if the new handle is

securely installed and rotates smoothly.
If everything is normal, you can reconnect the power supply (if it is

an electric motorcycle) and conduct a test ride.

Product Paramenters

Guangzhou Yaye Cross Border E-Commerce Co., Ltd.Guangzhou Yaye Cross Border E-Commerce Co., Ltd was established in 2001located in Baiyun District, Guangzhou, with a strong production, researchand development, sales team.
The company mainly engaged in motorcycle accessories, involving the saleof more than 30 models ofnearly 5,000 accessories, under the jurisdictionofYaye, Shuaiyin, AMG and other independent brands.
Products are exported to Africa, the Middle East, Southeast Asia and othercountries