Product Introduction
Paper core Automotive Accessories motorcycle engine oil filter fit
for
GS GN250 NS200 LC135 BM150 SHOGUN TVS-KING.
The motorcycle oil filter element, also known as the oil filter or
machine filter, is a critical component in motorcycle engines. Its
main function is to filter impurities, gum, and moisture in the
engine
oil, ensuring that clean oil is delivered to all lubrication parts
of the
engine. This can reduce the frictional resistance between the
relative
moving parts in the engine, reduce component wear, thereby
protecting the engine and extending its service life.
The replacement cycle of motorcycle oil filter element (i.e. oil
filter
element) is 4000 to 6000 kilometers. However, this replacement
cycle is not absolute and may vary depending on the vehicle model,
usage environment, and driving habits.
The following points may affect the replacement cycle of the oil
filter
element:
Vehicle model differences: Different brands and models of
motorcycles may have different engine designs and oil circulation
systems, so the replacement cycle of the oil filter may also vary.
It is
recommended that car owners refer to the recommendations in the
vehicle manual for the most accurate replacement cycle information.
Usage environment: If the motorcycle is frequently driven in harsh
environments such as dusty, humid, or high-temperature areas,
more impurities and moisture may be mixed into the engine oil,
accelerating the clogging and aging of the oil filter element. In
this
case, the car owner may need to replace the oil filter element in
advance.
Driving habits: Intense driving or prolonged high load operation
can cause the engine to produce more sludge and impurities,
which can accelerate the clogging of the oil filter. Therefore,
driving habits are also an important factor affecting the oil
filter
replacement cycle.
Oil quality: High quality oil usually has better cleanliness and
antioxidant properties, which can extend the service life of oil
filters. On the contrary, low-quality engine oil may accelerate
the clogging and aging of the oil filter element.
To ensure the normal operation of the engine and extend the
service life of the oil filter, car owners should regularly check
the color and viscosity of the oil, and observe the appearance
of the oil filter for signs of damage or blockage. If you notice
that the engine oil has turned black, thickened, or has a strange
odor, or if the oil filter is severely clogged, it is necessary to
replace the engine oil and oil filter in a timely manner.
Tool preparation: Prepare the necessary tools for replacing the
oil filter, such as a wrench, funnel, container, etc.
Safety measures: Ensure that the motorcycle is parked on a
stable surface, turn off the engine, and wait for a period of time
for the engine oil to cool down. At the same time, wear protective
gloves and glasses to avoid oil splashing onto the skin and eyes.
Drain old engine oil: Find the drain screw at the bottom of the
motorcycle and loosen it to allow the old engine oil to flow into
he prepared container. Be careful not to let the engine oil splash
into the surrounding environment.
Remove the old oil filter: Use a wrench to unscrew the cover of
the oil filter and carefully remove the old oil filter. Be careful
not to
let the oil from the old oil filter come out.
Install new oil filter: Before installing the new oil filter, a
small
amount of new oil can be applied to its contact surface to ensure
sealing. Then, install the new oil filter element in its original
position and tighten it to the specified torque with a wrench.
Add new engine oil: Use a funnel to slowly add new engine oil to
the engine, while checking if the oil level is within the specified
range. Do not add excessive oil.
Product Paramenters
| Product name | motorcycle engine oil filter |
| Place of Origin | Guangdong, China |
| brand | YAYE |
| Quality assurance service | 1 year |
;/
